Good morning, my friends. It was good to have a day without the burden of a dreaded procedure on my mind. We did our grocery shopping, and I felt light as a feather. Now we're probably good with food for at least a week, and I can focus on the things I enjoy. Smitty is all about it. When I came into my office this morning, I found him ready to be my copy editor. He took a short nap while he awaited my arrival.
When I made my way to the sewing room, my goal was to finish top-stitching and trimming the two most recent blocks for the Northern Wilderness quilt. My friend, Angie, asked me what kind of stitch I use when I do machine applique. For almost all machine applique, I'll use a cotton or rayon thread and my machine's blanket stitch. In another lifetime, I even wrote a tutorial about this.
This quilt is a little different. As I wrote in an earlier post, the written pattern suggested doing raw-edge stitching with monofilament thread. There are a lot of little nooks, crannies, and curves in the applique pieces. I considered doing my usual machine blanket stitch, but I'm afraid that will be too much thread. A blanket stitch would be too wide and "thread heavy" to look right. So, okay. I agree with the monofilament, and I decided to follow the pattern's lead for this project. It barely shows. You can see it in the image below. I'm also using a microtex needle to avoid punching big holes in the applique.
For today's sewing adventure, I'll be starting on this new project called Stair Steps. My plan is to make this quilt one row at a time. There's going to be a lot of cutting for this project.
The little squares are all 2-1/2 inches. It'll make good use of my scraps, but all that cutting can make my wrist hurt. I'm thinking I'll try putting a splint on my wrist to see if that can help. But first...slow-stitching. I'm making good progress on my harvest pumpkin. Probably I'll have it finished by week's end.








6 comments:
The Northern Wilderness blocks turned out beautifully! Enjoy starting your new project. It's always fun to add something new to the list.
The Alaska blocks are looking great! I like the new quilt you're starting, too. That is a lot of cutting, so I can see why you are going to take it a row at a time. Good idea!
I love this Stair Steps quilt! Can you tell me where I can find the pattern? I could just copy it but I like to give the designer credit! What a great leader and ender project this would make!
I love your Alaska blocks. Going to be a stunning quilt. I also appreciate the close up photo tip showing the benefits of the Microtex needle. Wowser. Nice. For me, today will be our first ebike ride since returning home, window cleaning, cutting fabric for another Homecoming Quilt and a hair appointment. I hope you have a wonderful day too!
I found that raising up my cutting area helped alleviate my wrist pain. I use an adjustable height desktop that is the same size as my mat. It is set to about ten inches higher than my work table, but it will vary in ratio to your height. That quilt certainly has a lot of squares, your one row at a time method is a good idea.
I think I would be so worried about possible fraying with only a straight stitch around the appliques. But what do I know...I'm not a sane quilter. No matter, the blocks are stunning anyway.
Post a Comment